Thursday, October 11, 2012


I wasn't able to touch the Mercedes for around two weeks. I've been busy, but I'm back to it, and got some more this past weekend. First, I finally finished cleaning out the wheel wells. This isn't so much for OCD cleanliness, but to inspect for rust spots I'll need to touch up or fix.

Wheel well #4 before:

after:


That's about all I could get to on Saturday and didn't have any time on Sunday. I had Monday off work, so I continued by pulling all the accumulated parts out of the car:


Then, I started stripping the interior to make body work easier:



I still need to clean the interior and remove the insulatio/sound-deadening material from the floor. That layer tends to hide rust.

I also spent a good amount of time vacuuming the rest of the debris of the car. There was a lot hidden in the console, dating back to when mice and other creatures roamed freely in the car:



The eventual goal is to get the interior, and the underside of the floors as clean as the wheel wells before I reassemble the car. This weekend, I'll finish cleaning the interior and see if I can fix the bad brake line.



3 comments:

  1. wow, did you remove this all by yourself or did your wife help you?

    ReplyDelete
    Replies
    1. 100% solo. These cars are pretty easy to disassemble.

      Delete
  2. any success with the brake line repair?

    ReplyDelete